The market defects of traditional mixer truck are mainly reflected in the difference of environment. The road conditions of the construction site and other places where the concrete mixer truck goes in and out are relatively complex. Affected by the construction, the road is generally narrow and the road environment is not good. Ordinary bicycles are OK. It's more difficult to drive half trailer, and the turning radius is bigger. It's not suitable to enter and leave the construction site. Especially in the construction site, in case of rain and muddy road, the semi-trailer is more likely to slip and sink.
The emergence of 2.6 square automatic feeding mixer solves these construction problems. The automatic loading mixer is a multifunctional concrete loading and mixing truck independently developed by Shandong Lu Zun Machinery Co., Ltd.
In order to ensure the normal operation process of the automatic feeding mixer, it is necessary to check the equipment in advance. So let's learn what problems we need to check and understand before the equipment is running.
1. Battery maintenance inspection: check whether the battery is fixed firmly.
2. Tire inspection: check the tire pressure at room temperature every month.
3. Clutch inspection: clutch liquid level between high and low is normal, if lower than the standard line, it may be the master cylinder or sub cylinder cup problem.
4. Inspection of brake fluid level: if the brake fluid is between high and low, it means normal.
5. Engine coolant level check: when the engine is in the policy state, the radiator must not be opened. It may be scalded by the splashed coolant or high temperature steam. After the engine cools down, check the coolant level to see if it needs to add distilled water or pure water or refrigerant. The height after adding water should not exceed the full level. If it is found that the coolant decreases rapidly in a short time, check whether the cooling equipment has leakage or go to the maintenance station directly.
2.6 the operating environment of the square mixer is usually not very good, which also requires us to have a detailed understanding of the equipment before operation. After ensuring that the equipment does not have any fault problems, it can be operated and used normally, so as to avoid all kinds of bad problems that may exist in the operation.
The above is the automatic feeding mixer shared by Xiaobian. What new and interesting knowledge have you seen? , welcome to click on the website link http://vncarmart.net Write down what you want to say in the message