众富购彩

山东山汽工程机器(团体)无限公司
热线德律风:400-879-1999 山汽官方微信
慎重申明 购机 售后
热线德律风:400-879-1999
您此刻地点的地位: 众富购彩官网> 消息资讯 > 公司消息 >

混凝土搅拌罐车运输进程中拌筒不能动弹的处置方式?

所属分类:公司消息 宣布时候:2020-09-08 来历:众富购彩:http://vncarmart.net 阅读量:18

  混凝土搅拌罐车在操纵到必然时候过量过少会呈现拌筒不能动弹,普通有3种环境1、运输进程中有混土壤卡住了;2、液压体系或发念头产生毛病;3、马达产生毛病。碰到这些环境也不要焦急教你应答方式:
  When the concrete mixer truck is used for a certain period of time, the mixing drum will not rotate. Generally, there are three situations: 1. The concrete is stuck during transportation; 2. The hydraulic system or engine fails; 3. The motor fails. Don't worry about these situations. teaches you how to deal with it
  1、运输进程中有混土壤卡住了;清算清洁就不题目了;
  1. The concrete is stuck in the process of transportation; there is no problem to clean it up;
  2、液压体系或发念头毛病的处置:
  2. Troubleshooting of hydraulic system or engine:
  1)翻开搅拌筒检验孔盖,旋松马达上高压软管的管讨论,扭转拌筒使拌筒检验孔斜向下,将砼从搅拌筒检验孔排挤;
  1) Open the manhole cover of mixing drum, loosen the pipe joint of high-pressure hose on the motor, rotate the mixing drum to make the manhole of mixing drum incline downward, and discharge the concrete from the manhole of mixing drum;
               全主动上料搅拌车
  2)将毛病车的高压胶管从马达上卸下,把救济用的高压胶管接上,另外一端接在救济车的油泵上,并将应急用的回油管一端接在毛病车的马达泄油口,回油管另外一端接在救济车的油泵回油口,操纵救济车来节制毛病车拌筒的扭转,将砼排挤。
  2) Remove the high-pressure rubber hose of the failure vehicle from the motor, connect the high-pressure hose for rescue, and connect the other end to the oil pump of the rescue vehicle, connect one end of the emergency oil return pipe to the motor oil drain port of the fault vehicle, and connect the other end of the oil return pipe to the oil return port of the oil pump of the rescue vehicle, and use the rescue vehicle to control the rotation of the mixing drum of the failure vehicle and discharge the concrete.
  3、马达产生毛病,处置则较简略,可把救济车的马达卸下装在毛病车上,再将各个油管接好,启动救济车便可将拌筒内的砼排挤。
  3. If the motor fails, the treatment is relatively simple. The motor of the rescue vehicle can be unloaded and installed on the fault vehicle, and then the oil pipes are connected. After starting the rescue vehicle, the concrete in the mixing drum can be discharged.
  产生毛病时应实时判定产生毛病的缘由,采用有用的办法将拌筒内的砼排挤后再处置毛病。
  In case of failure, the cause of the failure should be judged in time, and effective measures should be taken to discharge the concrete in the mixing drum before solving the fault.

 

众富购彩官网 产物 德律风 置顶
云彩店 七星乐官网 QQ爱彩 178彩票网 十大正规平台 500vip