1、 The tank has small inclination angle, low center of gravity, stable driving and rotation
The tank body adopts German schweiin process, makes special optimization according to different chassis, adopts special tooling, ensures that the tank body has small tilt angle, lower center of gravity, and is not easy to roll over. The welding area is reduced and the strength of mixing tank is greatly increased. Advanced plasma cutting technology is adopted to ensure the production efficiency and reduce the deformation error caused by heat.
2、 Excellent mixing and feeding performance
The head, cylinder and blade are made of Q345 alloy steel with good wear resistance and yield strength and long service life. The blade adopts double logarithm and Archimedes helix, which has excellent mixing performance. The feeding speed is more than 2.7 cubic meters per minute, and the discharging speed is more than 1.8 cubic meters per minute. The residual rate is low.
3、 The subframe has strong torsion resistance
The longitudinal and cross beams of the subframe are made of 16Mn rectangular tubes, which are formed in one piece without welding. Cable stayed structure is applied to the key stressed parts, so that the frame has strong anti torsion and anti tearing ability. The connection structure between the subframe and the chassis is reliable, which can reduce the influence of the torsion of the upper part on the chassis and prolong the service life of the chassis structurally.
4、 Feeding and discharging system
The feeding hopper has large space and reasonable design angle. It is characterized by fast feeding speed and less material blocking and overflow. The chute can be rotated 180 degrees with a limit device, which can be adjusted up and down, left and right. There is a locking device on the chute, which can be fixed and locked during vehicle driving to ensure safe and reliable driving.
5、 Hydraulic system
Hydraulic transmission system adopts the world famous brand in the field of fluid power, so that high quality reliability can be inherited
6、 Control system
The control system adopts rod type control system with accurate positioning and reliable control. The control points are in the cab and at both sides of the rear. The control system is compact in structure, flexible in operation and reliable in control.
Thank you for your reading. This article is from automatic feeding mixer. For more information and questions, please click: http://vncarmart.net We will continue to work hard to provide services for you, thank you for your support!