The main materials of automatic feeding mixer used for manual scrubbing are: clean water, tools are buckets, soft brushes, towels and dry towels.
1. Immerse the towel in the water, and then slowly wet the whole body from the roof down.
2. Wipe the test with a wet towel from the top of the car to remove the dust, and then gradually wipe the dust on the window and shield from the top to the bottom. Wipe off the dirt. Towel can not be wiped with sand, otherwise it will scratch or scratch on the film surface and glass.
3. If there is a lot of dirt, you can brush it with a soft brush first, then rinse it with water, and then scrub it with a towel.
4. After cleaning the car again, please carefully check whether there is residual dust. If so, wipe the tip again immediately until it is clean.
5. Use a clean dry towel to wipe the car body again in the above way until it is clean, without leaving any dirt and watermark.
Automatic feeding mixer hand scrubbing problem is like this, I hope to help you.
The above wonderful content comes from: full automatic feeding mixer. For details, please click to enter our website for query and docking http://vncarmart.net